Hand Industrial Co., Limited was established in 2010, is a professional stainless steel hardware manufacturer and supplier.
 |
| Quantity: | |
|---|---|
Small Countersunk Head with Ribs Torx Self Tapping Terrace Wood Screws
Product Type | Wood Screw |
Material | Stainless Steel/Carbon Steel,etc. |
Head Type | Small Countersunk Head |
Finish | Plain/Polishing/Zinc Plated/Black Oxide/Chrome Plated,etc. |
Grade | 4.8/8.8/10.9/12.9/A2/A4 |
Dimension | M3-M12, Customized is welcome |
MOQ | 10000pcs |
Packing | Standard Export Packing Method, bulk packing 25~30kgs/CTN,then pallet packed; cartons packed only if less than 250KGS |
Shipping | Express/Ocean Freight/Air Freight/Land Freight |
To enable a better connection, deck screws feature a section of thread underneath the head which is narrower. This helps for increased deck pull up when compared to wood screws, which feature a thread from the tip to the head of the screw unless there's a shank section.
Drive the deck screws into the board so that they are flush with the top of the board itself; slightly deeper than flush is alright, too. You just want to prevent screws from being too high or too low on the boards.
Small Countersunk Head with Ribs Torx Self Tapping Terrace Wood Screws
Product Type | Wood Screw |
Material | Stainless Steel/Carbon Steel,etc. |
Head Type | Small Countersunk Head |
Finish | Plain/Polishing/Zinc Plated/Black Oxide/Chrome Plated,etc. |
Grade | 4.8/8.8/10.9/12.9/A2/A4 |
Dimension | M3-M12, Customized is welcome |
MOQ | 10000pcs |
Packing | Standard Export Packing Method, bulk packing 25~30kgs/CTN,then pallet packed; cartons packed only if less than 250KGS |
Shipping | Express/Ocean Freight/Air Freight/Land Freight |
To enable a better connection, deck screws feature a section of thread underneath the head which is narrower. This helps for increased deck pull up when compared to wood screws, which feature a thread from the tip to the head of the screw unless there's a shank section.
Drive the deck screws into the board so that they are flush with the top of the board itself; slightly deeper than flush is alright, too. You just want to prevent screws from being too high or too low on the boards.
